Displaying: 227101 - 227150 of 229,212

Easy Chair

Mahogany easy chair upholstered in coral silk fabric, high back with generously shaped wings, slightly rolled arms, molded front legs, raking rear legs, H-shaped stretcher.

Portrait of Henry Temple

A Portrait of Henry Temple (1727-1788), Viscount of Palmerston, oil on canvas attributed to Thomas Gainsborough. The painting depicts a gentleman in a white jabot, a blue vest and gray waistcoat with brass buttons facing forward with his right hand at his vest. The canvas is surrounded by an ornate ...

Looking Glass

A Chippendale mahogany scroll frame looking glass with a pierced crest with a gilded phoenix and gilded inner liner. Probably England.

Mantel Clock

A mantel clock (A) by J. E. Caldwell, Philadelphia, with a brass and beveled glass four sided case, time and strike, key wind, mercury pendulum, Roman numerals at the brass dial decorated with cobalt blue enamel, a shaped rectangular rose mottled marble top and base, and brass works. Signed B & C at...

Chest of Drawers

Chippendale mahogany chest of drawers with two small drawers above three large drawers, heavy brass escutcheons and pulls, ogee bracket feet.

Camel Back Sofa

Mahogany camel back sofa with arched crest and scrolled arms, red wool damask upholstery, three Marlborough front legs opposed by rear raking legs and double H-shaped stretcher.

Tilt-top Candle Stand

Chippendale mahogany tilt-top candle stand with an urn turned shaft, serpentine square top, tripod base with snake feet, and a refinished surface.

Candle Stand

Mahogany candle stand with a round top, urn shaped shaft on tripod base with three snake feet.

Floor Lamp

A wrought iron floor lamp with penny feet at the tripod base, a round candle cup, and a high tapered rod at the back.

Tall Case Clock

Mahogany tall case clock (A), arched pediment with pierced fretwork flanked by three brass finials, reeded and brass inlaid columns flanking the clock face, decorative brasswork surrounding clock, pierced iron arms, veneered case door with rounded top and elaborate brass escutcheon, columnar sides w...

Arm Chair

Chippendale mahogany arm chair with carved fan at crest, scrolled and carved crest, pierced and carved splat, scrolled arms and arm supports, broad trapezoidal slip seat, upholstered in red damask, cabriole front legs and pad feet, and raking rear legs.

Pewter Measure

Pewter half gill measure with bulbous body, loop handle, and splayed rim foot.

Piano Forte

Mahogany piano forte with tiger maple banding above and below the keyboard, ivory keys, a rectangular case, and ebonized triangular inlay with tapered legs on casters. Pennsylvania.

Banjo Clock

An antique banjo clock (A), Willard's Patent, with a brass acorn finial above a round glass with a brass bezel, a white painted dial with Roman numerals, steel hands and key escutcheon, reverse painted glass at the throat with an eagle, acanthus leaf and shield on green background, brass supports at...

Reverse Painting on Glass

An English nineteenth century allegorical reverse painting on glass, "The Element of Water", in an ebonized carved frame. The painting shows a portrait of a seated woman wearing a pink dress, seated outdoors below an arch. At the left in the distance is a man in a boat on a river with a fishing net....

Pair of Candlesticks

Pair of brass candlesticks with rectangular bases.

Candle Mold

Tin mold for a single candle. One end has a conical tip with a hole in the end for a wick. There is a rectangular area near the bottom end of the candle.

Candle Mold

Tin candle mold for twelve candles, with rectangular pans unifying the tops and bottoms of the twelve candle tubes.

Candle Mold

Tin candle mold for six candles, with a rectangular pan unifying the bottoms of the six candle tubes into one line.

Lantern

Pierced tin candle lantern. painted black. The body of the lantern is divided into three sections: one section holds the door opening, the other two sections each feature a design of holes pierced in a concentric circle.

Lantern

Pierced tin candle lantern. The body of the lantern is divided into three sections: one section holds the door opening, the other two sections each feature a design of holes pierced in a concentric circle.

Lantern

Pierced tin candle lantern. painted black. The body of the lantern is divided into two sections: one section holds the door opening, the other section features a pierced design made up of holes pierced in the shape of three arches side by side.

Table Linen

Cotton chintz double-sided fabric with a base color of turquoise, a white figured border design, and a central medallion in navy blue. Designs are in a golden brown, white, and navy blue.

Wooden Fork and Spoon

Matching carved wooden salad fork and spoon with leaves and grapes carved into the handles.

Table Seating Planner

Brown oval board with a leather(ette?) top surface with two smaller oval pieces of leather attached at the center top. The back of the board is covered in a brown watered and ribbed silk. At one end, in tiny gold print is printed "Made in Italy". At the opposite end on the back is a triangular met...

Bowl

Bowl has a flat bottom, sides that flare out to the top rim, and a row of a decorative design on both the top and the bottom of the bowl rim.

Chair Upholstery

Needlepoint chair seat upholstery with a green background, two roses in shades of pink at the center, surrounded by leaves and other flowers. Paper clipped to the back of one side is a piece of paper that reads "Florence Bixby / worked this Removed / needlepoint from / #2 Gothic back Chip chair"

Silver Cloth

Brown flannel-like material.

Shoe Horn

Shoe horn made up of a long piece of black curved metal, with a tube of black foam around one end as a handle.

Toy Snake

Handmade snake made by applying clay to a strip of cloth in segments of graduated sizes. Painted primarily green, with some white on the underside, a red mouth and red and yellow eyes.

Faucet Handles

Pair of white ceramic "Hot" and "Cold" faucet handles in a rounded off "X" shape.

Pastry Blender

Pastry blender with shaped, unfinished wooden handle, metal plates to hold the wires and connect to the handle, and seven blending wires.

Tongs

Silver-colored metal tongs with black plastic hanging circle and hand grips, and scalloped edges to the tongs.

Winged Corkscrew

Gold-colored metal (brass) winged corkscrew with a Napoleon coin at the top.

Measuring Cup

Straight-sided silver-metal measuring cup with a copper-covered bottom, black handle, and marks for increments of one cup pressed into the sides.

Scarf

Maroon wool scarf woven in a twill weave and with 3/8" of fringe at each end. The tag has "The Firehouse / Damariscotta, Maine" woven into the tag in red thread.

Placemats

Set of three round placemats or hot dish mats made from braided coils of natural fiber.

Mold

Two part round tin mold with a handled cover and fluted sides.

Pewter Whale Oil Lamp

Pewter oil lamp with saucer base and double wick. There is a white sticky label on the bottom of the lamp well with "Chamber Whale / Oil Lamp / American Boston / c. 1850" printed on it.

Pewter Plate

Round pewter plate with 1 1/4" rim that turns up in the 3/4" nearest the outer edge.

Pewter Warming Plate

Round pewter plate with a hinged flap in the rim and a 1 1/4" deep smooth outside wall to which two handles are attached on opposite sides. About 1/4" from the front of the plate, a 1/2" wide loop of metal extends out about 1/2" on each side of the plate. From the loop, a 2" wide U-shaped metal han...

Pewter Plate

Round pewter plate with 1 5/16" wide plain rim.

Pewter Plate

Round pewter plate with 1 5/16" wide plain rim.

Pewter Warming Plate

Round pewter plate with a flap in the rim and a 1 1/8" deep smooth outside wall to which two handles are attached on opposite sides. Near the front of the plate, a 1/2" wide loop of metal extends out about 3/8" on each side of the plate. From the loop, a 2" wide U-shaped metal handle moves freely, ...

Wire Fruit Basket

Footed wire round basket made up of wire that is twisted to look like rope.

Crystal Jar

Clear glass jar with molded design to imitate cut glass. The exterior of the body bulges out in the bottom inch.

Framed Document

Letter in a black wooden frame with gold trim in the inner-most section of the frame. The letter, written on February 27, 1996, is to Bill Waters from Rose Simon, Curator of the Hattie Carnegie Exhibition, and Dorothy Twining Globus, Director, of The Museum at the Fashion Institute of Technology in...

Framed Document

Letter in a black wooden frame with gold trim in the inner-most section of the frame. A beige mat is cut into two windows to feature two items, a letter and a smaller comment. The typewritten letter, written on September 30, 1960 to Bill Waters of the Chapman-Hall Preservation Society, Inc., is fr...

Framed Document

Black plastic-coated wood frame with gold trim at the inner edge. An exhibition label from the Hattie Carnegie Exhibition has been mounted on a beige woven fabric. The exhibition label is in black ink, in an italic font, on off-white matboard with a beveled edge. The label reads "This line-up of h...

Framed Document

Black plastic-coated wooden frame around a pay stub for "W. Waters" for the period ending "9/9" for $50.00 (less taxes) from Hattie Carnegie, Inc., New York, New York. The document has 2 1/2 small holes on the left side of the paper, and serration dots 2/3 of the way up the center of the document. T...